Colorful Glass Pendants

I really enjoy working with the glass tiles from Sakura Craft. For this project, I recycled some painted photo paper and applied flower stickers from Sparkraft Enterprise.

It is a little hard to tell, but I did fill the middle of each flower and petals with the colored 3D Crystal Color Lacquer from the Glitter primary line.

The photo paper was painted with Lumiere by Jacquard. The word "soul" in the third pendant had been printed on the photo paper using my Photosmart printer.

I was not very patient when I glued the paper to the glass with the 3D Crystal Lacquer and you can see that some air bubbles did form at the top. You want to make sure you apply even pressure to the glass as it is drying, to avoid air pockets.

The paper was initially larger than the glass piece. I glued the piece down and once it was dried, trimmed very close the the glass.

I used wasabi paper on the back of the glass pendant with a coat of 3D Crystal Lacquer. The bails and chain are also from Sakura Craft. The bail attached with 3D Crystal Lacquer.

Keep on creating!

Heather Morrow
Creative Souls

P.S. Check out the Creative Souls Retreat happening this fall in the San Bernardino Mountains. Join us for this fun-filled weekend. Spend more than 40 hours unleashing your own Creative Soul! www.creativesoulsretreat.com

Clowning Around, Part Duex

Okay, I'll admit that I am a bit enamored with the Graphic 45 Le Cirque Collection; however, when I started the project - I intended for it to be more of a sliding puzzle - where you move the boxes around to create or jumble up an image. I had been sent these glass tiles along with jewelry findings to create my latest Design Team project from Sakura Craft.

I was on the hunt for a small box and found this in my basket of scraps. It was packaging from some sort of device - I don't remember, but now I had a box and the tiles puzzle idea was evolving as I started thinking outside the box in order to create "Controlled Mayhem to Dazzle & Delight."

I started by covering the box in the LeCirque Collection paper. I tried to match up images where I could, as I turned the corners. To glue the pieces down to the box, I used Clear 3D Crystal Lacquer.

I then used the 3D Crystal Lacquer to glue the different sizes of glass tiles to the tag images.

After the Crystal Lacquer had dried, I used trimming scissors to cut closely around the edges of the tiles.

Then the fun part -- creating a layout in the box that told a story. I placed everything in position before I began gluing the pieces or using pop-dots to secure them to the box.

The final product hanging on my dining room wall. The tag hanging on the ring was a last minute whimsical addition.

I really enjoyed putting this project together --as it continued to evolve from what I had originally envisioned. The glass tiles are very easy to work with; however, if you get too much 3D Crystal Lacquer on the tile, it can slide off your image. Less is definitely more in this case.

Have fun creating!